User manual

32 G1369B LAN Interface User Manual
2Getting Started
Automatic Configuration with Bootp
Figure 19 Bootp Server
4 Identify your LAN Interface by the MAC address, see Figure 19.
5 Select Configure -> Add Entry to configure the Bootp Manager (Figure 21).
The drop down box “MAC address” lists all MAC addresses found. Select
your MAC address. If no hardware address is found, select Cancel and
repeat step 3 and step 4.
Figure 20 Add Bootp Entry - Select the MAC address
NOTE
If you are working in a network system, you may see other LAN Interfaces appear,
overwriting your LAN Interface information periodically.