User manual

18 G1369B LAN Interface User Manual
2Getting Started
Installing and Cabling the LAN Interface
2 Note the MAC (Media Access Control) address for further reference. The
MAC or hardware address of the LAN Interface is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label on the card (see Figure 6 on
page 17).
Figure 7 MAC-Label
3 Turn off instrument line power or remove the power cord before installing
the LAN Interface.
4 On your instrument, identify the option slot for the MIO accessory card.
5 Remove any blank cover plates and ensure that the slot is empty.
Figure 8 Location of LAN Interface (e.g. 1100/1200 series detector)
Part number of the LAN Interface, see page 54
Revision Code, Vendor, Year and Week of assembly
MAC address
Country of Origin
G1369-61800
BB ZZ 1003 MSS-A
MAC 0030D3177321
Made in Germany
NOTE
If the module has the 1100 CAN modification board installed, it probably has a revision 1
mainboard and will not accept the LAN interface. Refer to “LAN Interface Compatibility” on
page 13