Specifications

9
General requirements
Minimum system requirements Windows XP / Vista / 7 / 8
Software requirements
Agilent IO Libraries Suite (included)
Please see requirements on page 14
Supported standards
USB 2.0 high speed
Standard USB endpoints supported
IEEE-488.1 and IEEE-488.2 compatible
SICL and VISA 2.2
Unsupported GPIB modes of operation
Pass control
Non-system controller mode
General characteristics
Power USB bus-powered device, +5 V, 500 mA (max), 200 mA (typ)
GPIB transfer rate 1.15 MB/s or better
Connectors
Standard 24-pin IEEE-488 (GPIB)
Standard USB A
USB hubs Self-powered hubs
Parallel polling
A single parallel poll can easily check up to eight individual devices at once,
corresponding to the number of data lines on the GPIB
Cable 2.5-meter, shielded connector rated for 1500 insertions
LED indicators READY, ACCESS, FAIL
Maximum connections Maximum of 4 converters can be connected to the PC
Instrument connections
14 instruments—daisy chain via GPIB
Configuration Plug-and-play
Warranty 1 year
EMC and Safety
1
IEC 61010-1:2001/EN 61010-1:2001
Canada: CSA C22.2 No. 61010-1:2004
USA: UL 61010-1:2004
Dimensions
Length, width, and height 105 mm (L) x 64 mm (W) x 30 mm (H) (includes connectors)
Weight 215 grams
Environmental specifications
Operating environment 0 °C to 55 °C
Operating humidity –40 °C to +70 °C
Storage environment Up to 90% at 40 °C non-condensing
Storage humidity Up to 90% at 65 °C non-condensing
82357B technical specifications
1
If you’re using Agilent IO Libraries Suite 15.0 or higher, you’re not required to install the driver separately as it would come built into the Suite.