User`s guide

Connecting Instruments to LAN

Step 7: Communicate with Instruments

What’s in This Step? This section gives guidelines to communicate with your instruments using

VISA Assistant. When you have verified communication with your

instruments (as desired), go to Step 8: Program Your Instruments

You can use applications such as VISA Assistant or the Telnet utility to

verify communication with instruments via the LAN.

7 Communicate with Instruments

You can use VISA Assistant

to verify communication with

instruments.

NOTE

Communication with installed LAN instruments was established in

Step 6: Configure the LAN Interface

if the instrument(s) were displayed

in the

TCPIP devices dialog box. Thus, this is an optional step you can use

to verify communication with instruments.