User`s guide

Connecting Instruments to LAN

Step 6: Configure the LAN Interface

7 Enter Device IP Address/Hostname. From the Add a TCPIP device dialog

box, enter either the IP address or hostname of the LAN instrument to

be added and then click the

OK button to re-display the TCPIP devices

dialog box. For example, this dialog box adds a TCP/IP device at IP

address 156.140.105.104.

Display Devices Present. The TCPIP devices dialog box displays the

TCP/IP devices present on the network. For example, this dialog box

shows a device with identifier TCPIP0::156.140.105.104::inst0::INSTR

is present on the network. Click the

OK button to close this dialog box.

Then, click the

OK button on each open dialog box to close the box.

Repeat for Other Instruments. If you have more than one instrument to

be added to the network, repeat the previous steps for each instrument

to be added. Then, go to Step 7: Communicate with Instruments

Enter IP Address

Click