User`s guide

35
Connecting Instruments to LAN
Step 6: Configure the LAN Interface
3 Set LAN Client Parameters. When the LAN Client dialog box appears, in
almost all cases, you can accept the default settings. If you need to
change any items, click the
Help button for an explanation of the items.
Change items as required and then click the
OK button to re-display
the
IO Config main screen.
4 Re-Display LAN Client Dialog Box. When the IO Config main screen
reappears, in the
Configured Interfaces box highlight the TCP/IP device
name you set in the previous step (VISA Interface Name of
TCPIP0
and SICL Interface Name of
lan in this example). Then, click the Edit...
button to re-display the
LAN Client dialog box.
Typically, you
can accept the
default settings.
Click
OK
Highlight TCP/IP
Device Name
Click Edit...