User`s guide

18
Connecting Instruments to LAN
Step 2: Gather Network Information
Step 2: Gather Network Information
What’s in This Step? When you have selected the type of LAN to connect your instrument to,
the next step is to gather information for your site LAN or to define
parameters for your private LAN. When you have gathered the necessary
information, go to Step 3: Connect Your Instruments
.
# For steps to gather site LAN network information, go to
Gather Site LAN Network Information
.
# For steps to select private LAN network parameters, go to
Define Private LAN Network Parameters
.
Gather network parameters for site LAN connections or define private
LAN parameters.
lnstrument Information (Completed by Instrument User)
(Serial Number and Ethernet (MAC) Hardware Address usually on label on instrument)
Instrument Serial Number: ______________________________
Ethernet (MAC) Hardware Address: ______________________________
Site LAN Network Information Card
2 Gather Network Information