User`s guide

 Add Remote GPIB Interface. To configure the interface for GPIB instruments, in the
Agilent Connection Expert main screen click Add Interface and select Remote GPIB
interface to display the Remote GPIB Interface dialog box.
1a. Click Find Interfaces...
to locate E5810s on local
subnet.
1b. Or, type hostname or
IP address shown on the
E5810 display.
2. Change this value to the
GPIB SICL Interface Name
displayed on the E5810A
Welcome Page (see Step 3).
3. Test Connection to
verify connectivity and
configuration.
6 Add Remote GPIB Interface