User`s guide

 Using This Poster. Use Step 1 through Step 4 to install and configure the E5810A
LAN/GPIB Gateway for Windows. If you want to program GPIB and/or RS-232
instruments using your PC or you want to use the Agilent IO Libraries (VISA, VISA
COM, and SICL), also do Step 5 through Step 8.
NOTE
If you have difficulty installing the E5810A, see Troubleshooting Information on the
back of this poster. For additional information on any of the steps on this poster, see
the E5810A LAN/GPIB Gateway for Windows User's Guide.
 Check Your Shipment Items. In addition to this poster, your E5810A LAN/GPIB
Gateway shipment should include the items listed. If items are missing or damaged,
contact Agilent Technologies. See E5810A General Information on the back of this
poster for addresses.
• Agilent E5810A LAN/GPIB Gateway for Windows
• E5810A Power Cord
• Agilent Automation-Ready CD with IO Libraries Suite
• E5810A LAN/GPIB Gateway for Windows User's Guide
• E5810A Warranty Statement
• Software License Agreement
 Check Your PC/Web Browser. The E5810A LAN/GPIB
Gateway is supported ONLY on Windows XP/Vista/7/8/Server
2008 R2. To communicate with the E5810A from your Web
Browser, you will need Internet Explorer 5.01 or higher (Microsoft Internet Explorer 7
or higher recommended for Vista).
 Rack-Mount the E5810A (Optional). As desired, you can mount the E5810A in a
standard EIA rack using the E5810-00100 Rack Mount Kit (or equivalent). The
E5810A is one standard half-rack unit wide and one standard rack unit high. See the
E5810-00100 Rack Mount Kit for instructions.
1 Before You Connect the E5810A