User`s guide

Contacting Your IT Department
 Before You Connect the E5810A. Before you connect your E5810A to an
Enterprise (Corporate) network, copy the E5810A Serial Number and
Ethernet (MAC) address (located on the underside of the E5810A) in the
space provided on the following E5810A LAN/GPIB Gateway Information
card.
E5810A LAN/GPIB Gateway Information
Serial Number: ____________________________
Ethernet (MAC) Hardware Address: ____________________________
Default Values (for IT Department): DHCP: Enabled at power-on
Hostname: No hostname configured
 Ask Your IT Department for Network Configuration Information. After you
enter the E5810A Serial Number and Hardware Address, copy this page
and provide the copy to your IT department. Ask them to answer the
following questions and return the completed form to you.
NOTE
If the Enterprise network does not support DHCP, see Configure E5810A
Using Local Network to configure the E5810A using a Local network.
Enterprise Network Information
Does the Network Support DHCP? Yes ___ No ___
If No, provide: IP Address (Static): ______.______.______.______
Subnet Mask: ______.______.______.______
Gateway IP Address: ______.______.______.______
Does the Network Support DNS? Yes ___ No ____
If Yes, provide: E5810A Hostname: __________________________
DNS Server (IP Address): ______.______.______.______