User`s guide

1-4 Agilent 4155C/4156C VXIplug&play Driver User’s Guide, Edition 1

Installation

Hardware Requirements with Agilent VEE

The following hardware is required to use Agilent VEE and the VXIplug&play

drivers.

• Controller

• 486/66 with Coprocessor (minimum recommendation)

• 586(Pentium)/90 or better is recommended.

• Memory

• For Windows 95: 16 Mbyte. 24 Mbyte or more is recommended.

• For Windows NT: 24 Mbyte. 32 Mbyte or more is recommended.

• Hard disk (minimum disk space)

• 20 Mbytes for Agilent VEE (HP VEE version 4.0)

• 2 Mbytes for 4155/4156 driver

• 1 Mbyte for E5250A driver

• Graphics

1024 × 768. 1280 × 1024 is recommended.

• IEEE 488 Interface card

Agilent 82341C GPIB Interface Card, or equivalent.

• CD-ROM drive

A CD-ROM drive will be required to install the software needed to use the

VXIplug&play driver.

• Flexible disk drive

A 3.5 inch flexible disk drive is required to install the drivers.