Computer Drive User Manual

Additional Safety Information

The following general safety precautions must be observed

during all phases of operation of this instrument.

Failure to comply with these precautions or with specific warn-

ings elsewhere in this manual violates safety standards of

design, manufacture, and intended use of the instrument. Agi-

lent Technologies, Inc. assumes no liability for the customer’s

failure to comply with these requirements.

This product is designed for use in compliance with:

• IEC 61010-1:2001/EN 61010-1:2001

• USA: UL61010-1:2004

• Canada: CSA C22.2 No. 61010-1:2004

For further information on safety, refer to the 82357B User’s

Guide.

CAUTIONCAUTION

• Use the device with the cables provided.

• Repair or service that is not covered in this manual

should only be performed by qualified personnels.

WARNING

• Do not use the device if it appears damaged or

defective.

• Observe all markings on the device before connecting

any wiring to the device.

• Do no operate the device in the presence of flammable

gases or fumes.

• Do no install substitute parts or perform any

unauthorized modification to the device.