Computer Accessories User Manual

Installing and Configuring the 82350 1
82350B Installation and Configuration Guide 23
Step 4: Configuring the 82350
This step shows how to configure a Windows
XP/Vista/7 operating system for a PC that has an
82350 installed.
Installing configuration files
1 Apply Power. Apply power to the PC and to the
installed GPIB instruments. As Windows starts
again, a Found New Hardware Wizard may
start.
2 Install Configuration Files. Click Next> to
accept the defaults. (Make sure that you have
installed Agilent IO Libraries Suite first. You will
not need a CD.) Click Finish to complete the
installation.
3 Open Connection Expert. Click the Agilent IO
Control icon in the Windows Notification area,
and then click Agilent Connection Expert. When
the main screen appears, you will see a map of
the system connections in the Instrument I/O
on this PC pane (also called “Explorer Pane”). If
you see your interface and instruments in the
Explorer Pane, you are ready to go!
NOTE
For help with Connection Expert, refer to the Agilent IO Librar-
ies Suite help file. This help file is available from the IO Control
> Documentation menu.