User`s guide

Module Options Accessories
Agilent 81600B Tunable Laser Source Family, Fourth Edition 31
Option 071: Straight Contact Connector
If you want to use straight connectors (such as FC/PC, DIN, SC, ST or
E2000) to connect to the instrument, you must do the following:
1 Attach your connector interface to the interface adapter. See Table 4
for a list of the available connector interfaces.
2 Connect your cable (see Ta bl e 4 )
Option 072: Angled Contact Connector
If you want to use angled connectors (such as FC/APC, DIN, E2000 or
SC/APC) to connect to the instrument, you must do the following:
1 Attach your connector interface to the interface adapter. See Table 5
for a list of the available connector interfaces.
2 Connect your cable (see Ta bl e 5 )
Table 4 Straight Contact Connector Interfaces
Description Model No.
DIN 47256 Agilent 81000 SI
FC / PC / SPC Agilent 81000 FI
SC / PC / SCP Agilent 81000 KI
ST Agilent 81000 VI
Diamond E-2000 APC Agilent 81000 HI
Table 5 Angled Contact Connector Interfaces
Description Model No.
Diamond E-2000 APC Agilent 81000 HI
SC / PC / APC Agilent 81000 KI
FC / APC Agilent 81000 NI
DIN 47256-4108.6 Agilent 81000 SI