User`s guide

Getting Started with the Agilent 81600B Tunable Laser Source Family Laser Safety Labels
16 Agilent 81600B Tunable Laser Source Family, Fourth Edition
Laser Safety Labels
Laser class 1M label
A sheet of laser safety labels is included with the laser module as required.
In order to meet the requirements of IEC 60825-1 we recommend that you
stick the laser safety labels, in your language, onto a suitable location on
the outside of the instrument where they are clearly visible to anyone
using the instrument.
Please pay attention to the following laser safety warning:
Under no circumstances look into the end of an optical cable
attached to the optical output when the device is operational. The
laser radiation can seriously damage your eyesight.
Do not enable the laser when there is no fiber attached to the
optical output connector.
The laser is enabled by pressing the gray button close to the
optical output connector on the front panel of the module. The
laser is on when the green LED on the front panel of the instrument
is lit.
The use of optical instruments with this product will increase eye
hazard.
The laser module has a built-in safety circuitry which will disable
the optical output in the case of a fault condition
Refer servicing only to qualified and authorised personnel.
CAUTIONWARNING