User`s guide

Power Tests Performance Tests

Agilent 81600B Tunable Laser Source Family, Fourth Edition 123

Figure 38 Total SSE Measurement.

Test Procedure

Note: This test does not apply to 81600B #130

This test procedure is applicable to:

It measures the Total SSE of the module at the outputs indicated.

1 Set up the equipment as shown in Figure 39:

Figure 39 Test Setup for Total Source Spontaneous Emission Test - Low SSE output

Agilent 81600B #200, Output 1, Low SSE

Agilent 81600B #160, Output 1, Low SSE

Agilent 81600B #150, Output 1, Low SSE

Agilent 81600B #140, Output 1, Low SSE

Fiber Bragg Grating Wavelength

• For Agilent 81600B #200, #160 or #150

use an FBG of: λ

FBG

≅ 1520 nm

• For Agilent 81600B #140, use an FBG of:

FBG

≅1407 nm

NOTE