User`s guide

Performance Tests Power Tests

108 Agilent 81600B Tunable Laser Source Family, Fourth Edition

Test Equipment - Power Stability Tests

Figure 33 Test Setup for Power Stability Tests

Test Procedure, Low SSE output

This test procedure is applicable to the:

It measures the power stability of the module at the outputs indicated.

1 Set up the equipment as shown in Figure 23.

2 Connect the fiber to the low SSE output, Output 1.

Set <Optical Output> to <Low SSE (1)>.

3 Move to the TLS channel of the Agilent 8164A/B Lightwave

Measurement System and set the [Menu] parameters to:

Agilent 81600B #200 (Output 1, Low SSE)

Agilent 81600B #160 (Output 1, Low SSE)

Agilent 81600B #150 (Output 1, Low SSE)

Agilent 81600B #140 (Output 1, Low SSE)

Agilent 81600B #130 (Output 1, Low SSE)

Tunable Laser Channel [Menu] Parameters Values

Modulation: <mod src><Off>