Specifications

Multiport Power Meter Getting Started 5
Instrument Markings
The instruction manual symbol. The product is marked
with this warning symbol when it is necessary for the user
to refer to the instructions in the manual.
Conformity Mark of the European Union.
Conformity Mark of the Canadian Standards Association,
inc
luding Agilent Technologies’ Registration Number.
Conformity Mark of the Australian ACA for EMC
compliance, including Agilent Technologies’ Registration
Number.
General Recycling Mark for plastic parts used in the
product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local Agilent
offi
ce, or see
www.agilent.com/environment/product/ for
more information.
WARNING
To avoid the possibility of injury or death, you must observe the
following precautions before switching on the instrument.
• Insert the power cable plug only into a socket outlet provided
with a protective earth contact. Do not negate this protective
action by using an extension cord without a protective
conductor.
• Do not interrupt the protective earth connection intentionally.
• Do not remove protective covers. Operating personnel must not
remove instrument covers. Component replacement and
internal adjustments must be made only by qualified service
personnel.
• Instruments that appear damaged or defective should be made
inoperative and secured against unintended operation until
they can be repaired by qualified service personnel.
• Defective, damaged, or malfunctioning laser sources must be
returned to an Agilent Technologies Service Center.
Do not operate the instrument in the presence of flammable gases
or fumes. Operation of any electrical instrument in such an envi-
ronment constitutes a definite safety hazard.