User manual

41
Agilent 35900E Dual Channel Interface
User Manual
Agilent Technologies
6
Parts Replacement
Remove/Replace the Top Cover 42
Remove/Replace the Front Panel 43
Remove the MIO Bracket 44
Remove the Connector Board 44
Remove/Replace the Mother Board 45
Remove/Install the SIMM Memory Boards 45
Remove/Install Power Supply Assembly 47
This section lists the replaceable parts of the 35900 and provides replacement
procedures.
The procedures in this section are intended for use by Agilent-trained service
personnel only. There are no user-serviceable parts inside the 35900.
The 35900 was designed for easy assembly and disassembly of all the
replaceable modules. The only tool needed for this process is a Pozidriv
screwdriver No. 2 Pt (part number 8710-0900).
All electronic assemblies and parts should be handled with proper ESD
procedures. This means that the parts should be packed in conductive
packaging material and, when not in this packaging, should be placed only on
a static-free surface. Anyone handling these items should be properly
grounded through a wrist strap that has a common ground with the static-free
work surface.