User manual
20 User Manual
3 Computer Connection
Handling the MIO Card
Connecting to a TCP/IP Network
The 35900 with a TCP/IP MIO card installed has an Ethernet IEEE 802.3
connector type RJ-45 (twisted-pair cable). Before attaching the 35900 to the
network, the TCP/IP interface card must be installed in the 35900 and the
network must be operational. Connect a LAN cable (part number 8121-0940)
to the 35900 and network before turning on the 35900.
CAUTION
The MIO card is static-sensitive and should be handled with static safe procedures to
avoid damage. When handling the board, use the following precautions:
• Use antistatic equipment during installation, such as a grounding mat and wrist strap.
• Hold the board by its edges.
• Do not touch the board’s electrical components, or edge connectors.
Figure 3 Network connection
HC8C%%%%%%%%
AVc>Y
%%%%%%%%%%%%
MIO Communication card thumb screws
LAN connector
LAN Id label