Service manual

Parts Replacement
Overview
Released: MAY 2000 Agilent 35900E Service Manual 11
Parts Replacement
Overview
This chapter provides a description of how to remove and replace each of the
major components from the 35900E Dual Channel Interface. Since the 35900E
repair strategy is only to the board or subassembly level, more detailed
information is not needed.
See Chapter 4 for an illustrated parts breakdown.
The 35900E has been designed for easy assembly and disassembly of all the
replaceable modules. The only tool needed for this process is a Pozidriv®
screwdriver No. 2 Pt (Part No. 8710-0900).
All electronic assemblies and parts should be handled with proper ESD
procedures. This means that the parts should be packed in conductive
packaging material and, when not in this packaging, should be placed only on a
static-free surface. Anyone handling these items should be properly grounded
through a wrist strap that has a common ground with the static-free work
surface.
The following table lists all of the assembly part numbers for the 35900E.