Installation guide

Setting up a LAN Instrument Network 3
Contents
Identifying the Required Instrument LAN ...........................................5
Configuring your PC for TCP/IP .................................................................... 6
Instruments on the LAN ................................................................................. 8
Instrument Firmware Requirements ...................................................9
Setting IP addresses from instrument keypad ...................................10
Setting the IP address for a 7890A GC ......................................................... 10
Setting the IP address for a 6890N GC ........................................................ 10
Setting the IP address for a 6850 GC with SN≥US102430001 ................. 11
Setting the 7820A IP Address from software keypad ............................... 11
Assigning IP addresses to instruments with Jet Direct cards ........13
Assigning IP addresses using the Agilent BootP Service ........................ 13
Using BootP with J2552A/B Jet Direct card ............................................. 13
Using BootP with J4100A Jet Direct and G1369A/B cards..................... 14
Assigning IP addresses permanently with Telnet ..................................... 16
Verify communications using the ping command ..............................19
Install the Jet Direct Card Accessories (if required) ........................20
Chemstation LAN Installation Checklist .............................................22