User`s manual

82 Chapter 3
O:\Manuals\E6380A_Progguid\Book\Guidelin.fm
HP-IB Command Guidelines
Guidelines for Operation
Using the STATe Command
The STATe command corresponds to the front-panel ON/OFF key and
is used to programmatically turn measurements, instrument functions,
and data functions ON or OFF.
Turning measurements, instrument functions and data
functions ON/OFF
Use 1 or ON to turn measurements, instrument functions, or data
functions ON. Use 0 or OFF to turn measurements, instrument
functions, or data functions OFF.
For example, the following BASIC language statements illustrate the
use of the STATe command to turn several measurements, instrument
functions, and data functions ON and OFF:
Example 3-31 Example
!Turn off FM source AFG1. *
OUTPUT 714;"AFG1:FM:STAT OFF"
!Turn off REFerence SET data function
OUTPUT 714;"MEAS:AFR:DISTN:REF:STAT OFF"
!Turn off TX Power measurement
OUTPUT 714;"MEAS:RFR:POW:STAT 0"
!Turn on REF SET measurement function for FM Deviation measurement
OUTPUT 714;"MEAS:AFR:FM:REF:STAT ON"
*This assumes the AFGen1 To field is set to FM.