User`s manual

76 Chapter 3
O:\Manuals\E6380A_Progguid\Book\Guidelin.fm
HP-IB Command Guidelines
Guidelines for Operation
Default Data Function Values The majority of measurements made
with the Test Set can be made using the Data Functions: REF SET,
METER, AVG, HI LIMIT and LO LIMIT. Measurements which can be
made using the Data Functions have a cross-reference with the
comment “See Number Measurement Syntax” in their syntax. If one or
more of the Data Functions are not available to that measurement, the
Data Function(s) not available will be listed in the syntax.
For each measurement that can be made using the Data Functions,
there is a default set of values for each Data Function for that
measurement.
For example, the Audio Frequency Analyzer Distortion measurement
can be made using all of the Data Functions. This would include REF
SET, METER, AVG, HI LIMIT and LO LIMIT. A complete listing of the
Distortion measurement’s Data Functions and their default values
would appear as follows:
• The Attribute units are: PCT
• The number of Averages is: 10
• The Average state is: 0
• The Reference value is: 1
• The Reference Display units are: PCT
• The Reference state is: 0
• The High Limit is: 0
• The High Limit Display units are: PCT
• The High Limit state is: 0
• The Low Limit is: 0
• The Low Limit Display units are: PCT
• The Low Limit state is: 0
• The Meter state is: 0
• The Meter high end setting is: 10
• The Meter high end Display units are: PCT
• The Meter low end setting is: 0
• The Meter low end Display units are: PCT
• The Meter interval is: 10