User`s manual

300 Chapter 9
O:\Manuals\E6380A_Progguid\Book\Errormsg.fm
Error Messages
General Information About Error Messages
Usually, negative numbers preceding the error messages text
correspond to the error conditions outlined in the Standard Commands
for Programmable Instruments (SCPI). For more information on SCPI,
order the following book,
A Beginner’s Guide to SCPI Addison-Wesley Publishing Company ISBN
0-201-56350-9 Agilent Technologies P/N 5010-7166
or contact,
Fred Bode, Executive Director SCPI Consortium
8380 Hercules Drive, Suite P3
La Mesa, CA 91942
Phone: [phone], FAX: [phone] CompuServe Number:
76516,254
Text Only Error Messages
Text only error messages are generally associated with manual
operation of the Test Set. This manual contains information on text
only error messages.
Text only error messages can also be displayed while running the Test
Set’s built-in diagnostic or calibration utility programs. Refer to the
Assembly Level Repair manual for information on text only error
messages displayed while running the Test Set’s built-in diagnostic or
calibration utility programs.
Example 9-5 Text only error messages take the form:
This is an error message.
Example 9-6 Example
Input value out of range.