User`s manual

294 Chapter 8
O:\Manuals\E6380A_Progguid\Book\Ibasic.fm
IBASIC Controller
The TESTS Subsystem
Figure 8-6 TESTS Subsystem File Relationship
TESTS Subsystem Screens
The TESTS Subsystem uses several screens to create, select, and copy
files, and to run tests.
The Main TESTS Subsystem Screen (SOFTWARE MENU)
Refer to Figure 8-7.
The SOFTWARE MENU screen is accessed by pressing the front panel
TESTS key. Test procedures are selected and run from this screen.
Additionally, access to all other TESTS Subsystem screens is
accomplished from this screen.
The Select Procedure Location: field is used to select the mass
storage location for the procedure to be loaded. The Select Procedure
Filename: field is used to select the name of the procedure to be loaded.
The Description: field gives the user a brief description of the
procedure currently selected in the Select Procedure Filename:
field.
To view all the procedures available on the mass storage location
currently selected in the Select Procedure Location: field, position
the cursor on the Select Procedure Filename: field and push the
rotary knob. A menu will appear in the lower right corner of the screen,
displaying all the procedure files which are available. This is not a
listing of the full contents of the selected mass storage location, it is
only a list of the procedures files that are stored on that media.
IBASIC Test Code
Name.PGM
Code for all possible
radio tests
Test Library
Name.LIB
Set of all parameters,
specifications, and
tests
Procedure 1
Name.PRC
Parameters,
Specifications, and
test for each radio
Procedure 2
Name2.PRC
Procedure N
NameN.PRC
ch6drw06.ds4