User`s manual

Chapter 8 253
IBASIC Controller
Method #2. Developing Programs on the Test Set Using the IBASIC EDIT Mode
Setting Up Function Keys In HyperTerminal
When in the TERMINAL mode, click on Settings, then Function Keys.
^[ is ESCAPE in HyperTerminal. See Table 8-3 on page 254 for the
escape codes.
NOTE HyperTerminal seems to work best when a mouse is used to access the
function keys, not the keyboard. Also, scrolling a program works best
when the HyperTerminal window display is maximized).
Setting Up Function Keys in AdvanceLink
• From the Main (highest level) screen, set up the 8 softkeys as follows:
1. Display User Definition screens by pressing Ctrl
F9.
2. Enter all the LABEL titles for K1 through K8.
3. Activate the “Display Function” feature by pressing softkey F7.
4. Now you can enter the escape codes for each edit command
aligned with the soft key definitions you just entered. With the
Display Functions key pressed, when you press the escape key, a
left arrow will be displayed.
• Once you have set up all 8 keys, you activate them by pressing Shift
F12. To deactivate your user defined softkeys, press F12.
• (- is ESCAPE in AdvanceLink. See Table 8-3 on page 254 for the
escape codes.