User`s manual

Chapter 8 239
IBASIC Controller
Interfacing to the IBASIC Controller using Serial Ports
5. Press REMOTE CONFIG (to set up the Serial port you selected above in
Remote To).
•Baud Rate: 9600
• Parity/DataBits: None/8
•Enq Ack: NO
•Asterisk: OFF
• Chk Parity: NO
• SR(CH): LO
•Recv Pace: Xon/Xoff
• CS(CB)Xmit: NO
•XmitPace: Xon/Xoff
6. Press DONE to return to the Config screen.
7. Press TERMINAL CONFIG.
•Terminal Id: 2392A
•LocalEcho: OFF
•CapsLock: OFF
•Start Col: 01
• Bell: ON
• XmitFnctn(A): NO
•SPOW(B): NO
• InhEolWrp(C): NO
• Line/Page(D): LINE
• InhHndShk(G): NO
• Inh DC2(H): NO
•Esc Xfer(N): YES
•ASCII 8 Bits: YES
• Fld Separator: down arrow or US
• BlkTerminator: up arrow or RS
• ReturnDef: musical note or CR
•Copy: Fields
•Type Ahead: NO
•Row Size: 160
• Host Prompt Character: left arrow or D1
• Horiz. Scrolling Increment: 08