User`s manual

Chapter 8 225
IBASIC Controller
The IBASIC Controller Screen
The IBASIC Controller Screen
The Test Set has a dedicated screen for interfacing with the built-in
IBASIC controller. This is the TESTS (IBASIC Controller) screen as
shown in Figure 8-1. This screen is accessed as follows:
1. Select the front panel
Menu key. The SOFTWARE MENU screen will
be displayed.
2. Using the rotary knob, position the cursor on the IBASIC field in the
lower center of the screen.
3. Push the rotary knob and the TESTS (IBASIC Controller) screen
will be displayed.
Figure 8-1 The IBASIC Screen
The TESTS (IBASIC Controller) screen can be accessed
programmatically by sending the following command:
ch6drw1.drw