User`s manual

212 Chapter 7

O:\Manuals\E6380A_Progguid\Book\Mencard.fm

Memory Cards/Mass Storage

Using the ROM

The Test Set comes with several Test Procedures stored on the internal

ROM. These Test procedures provide instrument diagnostic utilities,

periodic calibration utilities, memory management utilities, a variety of

general purpose utilities, and several IBASIC demonstration programs.

To see a brief description of what each procedure does perform the

following steps:

1. Display the SOFTWARE MENU screen by selecting the front-panel

TESTS key.

2. Use the cursor control knob to select the Select Procedure

Location: field and choose ROM from the choices.

3. Select the Select Procedure Filename field. A list of Test

Procedures stored on the ROM is displayed in the Choices: field.

Select a procedure.

A brief description of the Test Procedure will be displayed in the

Description field.

ROM cannot be written to for user storage.

The ROM’s mass storage volume specifier is ":MEMORY,0,4"

For example: to catalogue the contents of the ROM from the TESTS

(IBASIC Controller) screen enter:

Example 7-1 Example

CAT ":MEMORY,0,4"