User`s manual

156 Chapter 6
O:\Manuals\E6380A_Progguid\Book\Advoper.fm
Advanced Operations
Status Reporting
Table 6-7 shows the Hardware Status Register Group #2’s Condition
Register bit assignments.
Table 6-7 Hardware Status Group Register #2, Condition Register Bit
Assignments
Bit
Number
Binary
Weighting
Condition Comment
15 32768 Not Used (Always 0) Defined by SCPI Version 1994.0
14 16384 Unused in Test Set
13 8192 Unused in Test Set
12 4096 Unused in Test Set
11 2048 Inconsistent ACP Channel
Bandwidth and Resolution
Bandwidth
10 1024 ACP Channel Bandwidth or
Channel Offset too wide
9 512 AFGen1 Frequency Exceeds
Variable Frequency Notch
Filter Range
8 256 Requested Audio Voltage Too
Large for AFGen2
7 128 Requested FM Deviation Too
Large for RF Generator
Frequency
6 64 Requested Simultaneous AM
and FM Modulation
Simultaneous AM and FM
modulation is not allowed.
5 32 Audio Input Level Auto
Ranging Error
4 16 - - - - Not assigned.
3 8 - - - - Not assigned.
2 4 RF Gen/RF Anl/RF Offset
Frequency Combination Not
Possible
(RF Gen Tune Freq) - (RF Anal
Tune Freq) not equal to (RF Offset
Freq)
1 2 RF Generator Amplitude
Level Too High for Selected
Output Port
0 1 Spectrum Analyzer Reference
Level Too High/Low For
Selected Input Port