Specifications

Chapter 3 89
Troubleshooting
Service Screen
The first part of the names in the Choices menu relates to the
assembly where the switch, DAC, or gain setting is located. Some latch
names are not listed here.
• dstr: A2A44 Modulation Distribution
• aud1: A2A80 Audio Analyzer 1
• aud2: A2A40 Audio Analyzer 2
• refs: A2A23 Reference
• rfio: A2A130 RF Input/Output
• dcvt: A2A115 Downconverter
• ucvt: A2A110 Upconverter
• out: A2A24 Output Section
• rcvr: A2A21 Receiver
• gsyn: A2A25 Signal Generator Synthesizer
• rsyn: A2A22 Receiver Synthesizer
• spec: A2A20 Spectrum Analyzer
• genRef: A2A100 CDMA Generator Reference
• genRef2: A2A100 CDMA Generator Reference
• lo_if: A2A120 LO IF/IQ Modulator
• meas: A2A33 Measurement
• metron: A2A33 Measurement
• afg1: A2A32 Signaling Source/Analyzer
• afg2: A2A32 Signaling Source/Analyzer
• buffModN: A2A34 Data Buffer
Value (hex)
This field displays and changes the hexadecimal value for the latch
shown in the Latch field.
RAM Initialize
Selecting this field clears all SAVE registers and test programs, and
any initialized RAM disk(s), that may be in RAM. It also resets all
latches to their factory power-up configuration. If you have saved one or
more instrument setups using the SAVE function, using this function
will permanently remove them.