Specifications

330 Appendix A

Error Messages

Text Only Error Messages

Text only error messages are generally associated with manual

operation of the Test Set. Text only error messages can also be

displayed while running the Test Set’s built-in diagnostic or calibration

utility programs. Diagnostic messages are described in "Frequently

Encountered Diagnostic Messages" on page 73.

Text only error messages take the form:

This is an error message.

For example:

• Input value out of range - occurs when trying to set a value

above or below its capability (such as attempting to set the RF Gen

Freq field to 2 GHz).

• Turn off either AM or FM setting - occurs when trying to

perform simultaneous AM and FM modulation.