Specifications

Appendix A 325

Error Messages

Diagnostics Messages

The following message may occur when initiating and running the

Functional Diagnostics program.

Direct latch write occurred. Cycle power when done

servicing.

For other diagnostic messages see “Frequently Encountered Diagnostic

Messages” on page 73.

When a measurement is out of limits, a message is displayed at the end

of the test which indicates the following:

• Suspected faulty assembly.

• Confidence level of the assertion: low, medium, or high

• Failure code

For a description of the test, including an interpretation of the failure

codes, see Chapter 3 , “Troubleshooting,” on page 47.