Specifications

136 Chapter 6

Replaceable Parts

Replacement & Ordering Parts

Direct Parts Ordering

See “Factory Support” on page 46. The Agilent Support Materials

Organization can help you order and identify parts.

Assembly Replacements

With some assemblies you will receive a Memory Card that contains

factory-generated calibration data for that assembly. There will also be

an instruction sheet for loading the calibration data into your Test Set

after you’ve replaced the assembly.

NOTE

Periodic Adjustment Interval

The adjustment programs Periodic Calibration, IQ Calibration, and

Eb/No Calibration should be performed after any assembly referred to

in Table 7-1 on page 159 is replaced, or at least every 24 months. These

program can be run anytime to optimize the performance of the Test

Set. See Chapter 7 , “Periodic Adjustments,” on page 157 for details.

NOTE

Performance Test Interval

The performance tests in Chapter 8 , “Performance Tests,” on page 173

should be performed when certain assemblies are repaired or replaced,

or at least every 24 months. See Table 3-2 on page 75 for those

assemblies requiring performance testing/calibration.