Specifications

122 Chapter 5
Disassembly
A2 Disassembly
Attenuator Assembly
1. Remove the front, side, and rear external covers, and the top and
bottom internal covers, see “Removing the External and Internal
Covers” on page 104.
2. Remove the power supply assembly, see “A3 Disassembly” on page
126.
3. Turn the Test Set over and disconnect flex connectors W120 and
W123 from the attenuator, see Figure 5-15.
4. Remove the four screws that secure the attenuator to the chassis, see
Figure 5-15.