Specifications

120 Chapter 5
Disassembly
A2 Disassembly
LO IF/IQ Modulator and CDMA Generator Reference (Gen
Ref) Assemblies
The LO IF/IQ Modulator and Gen Ref assemblies need to be removed in
the following order. See Figure 5-14 on page 121.
Removing the LO IF/IQ Modulator Assembly
1. Remove the bottom cover, see “Bottom Internal Cover” on page 108.
2. Disconnect the cables shown in Figure 5-14 on page 121.
3. Remove the nine torx screws that secure this assembly to the
chassis.
Removing the Gen Ref Assembly
1. Remove the LO IF/IQ Modulator assembly.
2. Disconnect the cables shown in Figure 5-14 on page 121.
3. Remove the nine torx screws securing the assembly to the chassis
and lift the assembly.
When re-installing the assemblies, install the Gen Ref assembly first.