Specifications

108 Chapter 5
Disassembly
Removing the External and Internal Covers
Bottom Internal Cover
To access the assemblies on the bottom side of the Test Set, turn the
Test Set over, remove the screws shown in Figure 5-4, and lift the
bottom internal cover from the chassis.
CAUTION If the top covers are off, be careful. The exposed digital boards can be
easily damaged. Some of the digital boards have pull-rings that can
easily get hooked and pull assemblies from their connections.
Use Figure 5-5 on page 109 to identify the assemblies on the bottom
side of the Test Set.
Figure 5-4 Bottom Internal Cover
intcvr1.eps
MP15
Cover-Bottom
Screws (x27)