User`s guide

60
System Specifications
Pulse on/off Ratio Measurement Specifications (requires option 006)
Pulse on/off Ratio Measurement Specifications
(requires option 006)
’On’ power is averaged over the useful part of the burst. ‘Off’ is averaged over a
one bit interval centered at a user specified time.
Non-hopped mode only
Input frequency setting range:
± 10 kHz
Input level setting range: ± 3dB
Timing accuracy: ± 1.7 µs (± 1.1 µs typical)
Accuracy (on/off ≥ 40 dB, RF in/out only)
Off power
(dBm)
On/off ration accuracy
-30 to -1
± 2.4 dB ± 1.1 dB typically
-37 to -30
± 2.9 dB ± 1.3 dB typically
-41 to -37
± 3.7 dB ± 1.7 dB typically
-47 to -42
± 4.2 dB ± 2.1 dB typically