User`s guide

47
System Specifications
GSM Functionality Specifications
GSM Functionality Specifications
Bit/frame error rate measurements: Class Ia, Ib, and Class II bits in both raw
and residual form, Burst-by-Burst
MS power output level control: 1 to 19 for E-GSM900
1 to 15 for GSM900
0 to 15 for DCS1800
0 to 15, 30, 31 for PCS1900
Broadcast channel capability: BCCH + CCCH or
BCCH + CCCH + SDCCH/4
Control channels (SDCCH, FACCH,
SACCH):
BCCH + CCCH, BCCH + CCCH +
SDCCH/4, SDCCH/8 (non-hopped),
SACCH/FACCH
Call control capabilities: BS originated call (FS), MS originated
call (FS), MS camp-on, BS call
disconnect, MS call disconnect,
Handover, Channel Assignment, Inter-
band handover
1
and inter-band channel
assignment
1
Traffic channels: TCH/FS
Timing: Auto, manual, uplink-downlink and offset
measurement
Hopping: Two independent, user definable MA
tables with offsets. Intra band only
Speech encoding/decoding: Full rate speech
Speech echo mode: User selectable delay 0 to 5.1 seconds
Measurement coordination: Flexible control of burst type, ARFCN
and timeslot
SACCH MEAS result - serving cell: RXLEV, RXQUAL and timing advance
SACCH MEAS result - neighbour cell: RXLEV, ARFCN, BCC, NCC
1. Dual band operation only.