User`s guide

37
GPIB Commands
Dual Band Control Subsystem
E-GSM900 TCH Commands
These commands set the parameters that will be used for an E-GSM900 traffic
channel after a handover or assignment is sent.
DCS1800 TCH Commands
These commands set the parameters that will be used for a DCS1800 traffic
channel after a handover or assignment is sent.
Command Syntax Description
DUALband:TCH:EGSM? Queries the E-GSM900 traffic channel ARFCN
DUALband:TCH:EGSM <integer> Sets the E-GSM900 traffic channel ARFCN
DUALband:TLEVel:EGSM? Queries the mobile Tx power level in E-GSM900 mode
DUALband:TLEVel:EGSM <integer> Sets the mobile Tx power level in E-GSM900 mode
<integer> = 1 to 19
DUALband:AMPLitude:EGSM? Queries the RF input level for E-GSM900
DUALband:AMPLitude:EGSM <real> Sets the RF input level for E-GSM900.
Refer to App B, Agilent 8922M/S Programming Reference Guide
DUALband:AMPLitude:GTCH? Queries the GSM BCH + TCH downlink amplitude
DUALband:AMPLitude:GTCH <real> Sets the GSM BCH + TCH downlink amplitude
Refer to App B, Agilent 8922M/S Programming Reference Guide
Command Syntax Description
DUALband:TCH:DCS? Queries the DCS1800 traffic channel ARFCN
DUALband:TCH:DCS <integer> Sets the DCS1800 traffic channel ARFCN
<integer> = 512 to 885
DUALband:TLEVel:DCS? Queries the mobile Tx power level in DCS1800 mode
DUALband:TLEVel:DCS <integer> Sets the mobile Tx power level in DCS1800 mode
<integer> = 0 to 15
DUALband:AMPLitude:DCS? Queries the RF input level for DCS1800
DUALband:AMPLitude:DCS <real> Sets the RF input level for DCS1800
Refer to App B, Agilent 8922M/S Programming Reference Guide
DUALband:AMPLitude:DTCH? Queries the DCS1800 TCH downlink amplitude