User`s guide

30
Screens
Dual Band Control Screen
9. TX Level
This field tells the mobile which power level to use once a handover is requested.
This field is linked to the
Input Level field, if the Level Control field is set
to .
If the Level Control field is set to and the TX Level changes, the
Level Control will change to .
When in compatibility mode (
8922E or 8922G) and Level Control field is set
to , then the
Input Level will follow the TX Level.
When in compatibility mode (
8922E or 8922G) and Level Control field is set
to , then only the
TX Level will change.
10. Mobile Reports, Mobile Status and Call Counts
These fields are the same as those found on the Cell Control 2 screen. Values of
these fields will change appropriately as the mobile changes between E-GSM900
and DCS1800 operating modes.
MS TX Lev
Manual
MS TX Lev
MS TX Lev
Manual
E-GSM900 Default 15
Range 1 to 19
DCS1800 Default 10
Range 0 to 15