User`s guide

23
Screens
Cell Status Screen - Active Cell
Cell Status Screen - Active Cell
1. Dual Band
This field is displayed whenever the system is operating in dual band mode. When
this field is displayed it is a reminder of the following;
• No hopped calls can be made
• The BCH is in the E-GSM900 band or TCH in is the DCS1800 band
• If the call is ended, for whatever reason, the operating mode will return to E-GSM900.
2. Amplitude
This field changes, depending on what operating mode the system is in. When in
dual band mode with E-GSM900 band, this field shows the same setting as the
GSM BCH & TCH field found on the Downlink Amplitudes section of the
‘Dual Band Control Screen’ on page 26.
2a. TCH Ampl
This field changes, depending on what operating mode the system is in. When in
dual band mode with DCS1800 band, this field shows the same setting as the
DCS
TCH field found on the Downlink Amplitudes section of the ‘Dual Band
Control Screen’ on page 26.
1
2, 2a