User`s guide

19
How to Section
Making Measurements in the DCS1800 Band
Making Measurements in the DCS1800 Band
The procedures for making measurements in the DCS1800 Band are the same as
those used for a Standard HP/Agilent 8922 Test System. Refer to the Agilent
8922M⁄S User’s Guide for more information.
Measurements can not be made for hopped calls while using multi-band mode. If,
however, a measurement needs to be made for a hopped call, use the following
procedure.
1 End call
2 Return to the Cell Status screen
3 Select DCS1800 mode
4 Power cycle the mobile
5 Re-establish the call
6 Make the measurements