User`s guide

18
How to Section
Changing Band
Handover
E-GSM900 to DCS1800
1 Select Dual Band Screen (Refer to Dual Band Control Screen on page 26 for more
information).
2 Change the field to Handover, .
3 Select Channel, Tx Level and Input Level for the initial DCS1800 operating
parameters.
4 Select - this will change the band.
5 A handover command is sent to the mobile and the HP/Agilent 8922 is now operating
with the TCH in DCS1800 band. However, the broadcast channel will always stay in
the
E-GSM900 band.
DCS1800 to E-GSM900
1 Select Dual Band Screen (Refer to Dual Band Control Screen on page 26 for more
information).
2 Change the field to Handover, .
3 Select Channel, Tx Level and Input Level for the initial E-GSM900 operating
parameters.
4 Select - this will change the band.
5 A handover command is sent to the mobile and the HP/Agilent 8922 is now operating
with the TCH and broadcast channel in the E-GSM900 band.
Assign/Handover
Execute
Assign/Handover
Execute