User`s guide

17
How to Section
Changing Band
Changing Band
Assignment
E-GSM900 to DCS1800
1 Select the Dual Band screen (Refer to Dual Band Control Screen on page 26 for more
information).
2 Change the field to Assign, .
3 Select Channel, Tx Level and Input Level for the initial DCS1800 operating
parameters.
4 Select - this will change the band.
5 An assignment command is sent to the mobile and the HP/Agilent 8922 is now
operating with the TCH in DCS1800 mode. However, the broadcast channel will
always stay in the
E-GSM900 band.
DCS1800 to E-GSM900
1 Select the Dual Band screen (Refer to Dual Band Control Screen on page 26 for more
information).
2 Change the field to Assign, .
3 Select Channel, Tx Level and Input Level for the initial E-GSM900 operating
parameters.
4 Select - this will change the band.
5 An assignment command is sent to the mobile and the HP/Agilent 8922 is now
operating with the TCH and broadcast channel in the E-GSM900 band.
Assign/Handover
Execute
Assign/Handover
Execute