User`s guide

How to Section

Establishing a Call

This procedure is identical to that of a Standard HP/Agilent 8922 Test System.

1 Once the mobile has been connected and camped on to the HP/Agilent 8922

Multi-Band Test System, key in any number on the mobile.

2 Now initiate the call from the mobile. The display on the HP/Agilent 8922 should now

show that the call status is CONNECTED.

Potential Problems

If a call is not established, the uplink power may differ from the HP/Agilent

8922’s expected input level. The most likely reason for this type of problem is that

the mobile or the IF Link cable has not been calibrated. Refer to Calibration

Routine on page 7 for more details on calibrating the IF Link cable.