User`s guide

Conﬁguring the HP/Agilent 8922 Multi-Band Test System

Before You Start

Before connecting the HP/Agilent 8922 or HP/Agilent 83220 to each other or to

the line (mains) voltage, ensure you have read and familiarized yourself with the

section, Installing Your HP/Agilent 83220A/E, in the

Agilent 83220A⁄E User’s

Guide.

WARNING: The HP/Agilent 8922 and HP/Agilent 83220 are Safety Class 1 products (provided

with a protective earth terminal). A safety earth ground must be provided from the

mains power source to the product input wiring terminals, power cord, or supplied

power cord set. Whenever it is likely that the protection has been impaired, the HP/

Agilent 8922 Multi-Band Test System must be made inoperative and be secured

against any unintended operation.

WARNING: If the HP/Agilent 8922 or HP/Agilent 83220 are to be energized by means of an

external autotransformer for voltage reduction, make sure that the common terminal

is connected to the neutral pole of the power source.