Specifications

Chapter 4 82
Tests
TEST_05 TX In-Channel Tests
Parameters
36 TXworstcase
frequency
error
Hz −90.0 90.0 −180.0 180.0 −190.0 190.0
37 TXworstcase
phase error
(peak)
degrees 20.0 20.0 20.0
38 TXworstcase
phase error
(rms)
degrees 5.0 5.0 5.0
1. Available only when Spectrum Analyzer Option 006 is fitted.
Spec
no.
Description Units GSM900
Default
Lower
Limit
GSM900
Default
Upper
Limit
DCS1800
Default
Lower
Limit
DCS1800
Default
Upper
Limit
PCS1900
Default
Lower
Limit
PCS1900
Default
Upper
Limit
Parm
no.
Description Units GSM900
Default
Value
DCS1800
Default
Value
PCS1900
Default
Value
3 CP base station color code code no. 5.0 5.0 5.0
4 CP public land mobile network color
code
code no. 1.0 1.0 1.0
5 CP serving cell (BCH) ARFCN chan. no. 25.0 600.0 600.0
6 CP local area code code no. 1.0 1.0 1.0
7 CP mobile country code code no. 1.0 1.0 1.0
8 CP mobile network code code no. 1.0 1.0 1.0
9 CP control chan type [0=SD/8, 1=SD/4] 0 or 1 1.0 1.0 1.0
10 CP test with ciphering [0=no 1=yes] 0 or 1 0.0 0.0 0.0
11 CP delay(+) or advance(−) for trigger T 0.0 0.0 0.0
14 RT TCH [0=static 1=hopping 3 freqs] 0 or 1 0.0 0.0 0.0
15 RT cell TCH H.O. [0=inter 1=intra] 0 or 1 1.0 1.0 1.0
16 RT external pad and cable loss dB 0.0 0.0 0.0
20 RX RF level for signalling dBm −60.0 −60.0 −60.0
31 TX default power control level pcl 7.0 3.0 3.0
32 TX select in-channel tests XXXX 1111.0 1111.0 1111.0
33 TX in-channel sweep test start channel chan. no. 1.0 512.0 512.0
34 TX in-channel sweep test step channel chan. no. 62.0 187.0 149.0
35 TX in-channel sweep test stop channel chan. no. 124.0 885.0 810.0
45 TX phase/freq measurement averages Number 1.0 1.0 1.0
47 CP System [0=GSM900, 1=DCS1800,
2=PCS1900, 3=E-GSM]
0, 1, 2 or 3 0.0 1.0 2.0