Specifications

Chapter 3 67
Problem Solving
If an error message appears
Mobile did not change power properly
This means that the mobile station did not change to the assigned
power control level. Some possible causes are:
• The power control level entered is higher than the mobile station is
capable of generating.
• The mobile station did not go into loopback mode.
• A test SIM was not inserted in the mobile station under test.
TCH Hop Parameter is illegal value
An invalid value was entered in the parameter list for the parameter
that selects between a single or a hopped traffic channel. Allowable field
entries for this parameter are 0 and 1. Check parameter RT TCH.